Premium Waterslide Transfer Paper for Tumblers, Mugs, Glasses DIY

Printers Jack selects the best material from the market and tests each raw material before putting it into production. The brand is committed to helping everyone bring happiness and a better life. Our highly motivated team works to provide high-quality products and services to our growing customers around the world. The core team members are from well-known international brands, equipped with outstanding professional ability and global vision.

HIGH QUALITY INGREDIENTS: The waterslide transfer paper is crafted using premium quality printing paper to give you true, non-fading and high definition colors. With an excellent ink capacity, allowing inkjet printing results of up to 5760 dpi (dots per inch).

MAKE A FUN AND MEANINGFUL GIFT: With a waterslide paper, you can design and create a special gift that couldn't be purchased off the shelf. Your gifts will turn out just beautiful and be treasured forever! You can transfer the image you like to any textured surfaces and make them unique.

PRODUCT FEATURES: - Size: 8.3"x11.7" - Quantity: 20 Sheets - Status: Clear - Printer: For Inkjet Printer Only - Paper Storage: Store in a tightly sealed plastic bag in a cool, dry area.

OPERATION STEPS: 1. Print Image: Use an inkjet printer, adjust print settings to high quality, and let the paper dry for at least 3 minutes after printing. Print on the glossy side of the decal paper. No need to reverse (mirror) the image. 2. Acrylic Spray: Spray an even coat of the acrylic spray over your image. Allow it to dry for a few minutes. Apply two more coats to make a total of three coats. Let the paper dry for at least 10 minutes. Place the printed paper and the acrylic spray in a well-ventilated space. The ink would dissolve in water if you do not spray the image at least 3 times. 3. Cut Out Image: Use scissors to cut out the image that you want. Do NOT cut too close to the edge of the image, leave out a 2 ~ 3mm of spacing. 4. Soak In Water: Submerge the paper into the water for 30 ~ 60 seconds to separate the base paper and the transfer membrane. Wet the surface to place the decal on for easier decal maneuvering and positioning. 5. Attach and Remove: Take out the soaked decal and place it onto a desired surface with the image side facing up. Use your fingers, a damp cloth/paper towel or a squeegee to remove air bubbles and excess water, then slide the backing off. Do not take off the backing paper before placing. 6. Dry: Let the decal sit and dry for at least 3 hours. Do not expose it directly to sunlight during drying. Ceramics need to be baked in an oven at 230°F (110°C) for 10-15 minutes. It is NOT dishwasher safe and must be cleaned by hand gently. An extra coat of epoxy resin can be used on the finished decal for more protection and gloss.

product information: